The Kemper Profiling Amplifier is an all-in-one amplifier modeling rack unit. Choosing the best monitors for Kemper Amps is an art form. These Amps are used by many touring artists, eliminating the need for large amps and cabinets.
Using a Kemper Profiler Amp, you can create a profile of your very own amplifiers and store it into memory. Once you create a profile, you can use a Kemper as any preamp.
If you are in a rush, here’s the table of our Top 5 Favorites. The full review continues below, so scroll down!
Top 5 Monitors For Kemper Amps
What Are Studio Monitors?
Studio monitors are loudspeakers in speaker enclosures specifically designed for professional audio production. They are used in recording studios, filmmaking, television, and radio studios, wherever accurate audio reproduction is required.
Won’t Regular Speakers Do The Job?
Since they are designed to enhance the music played through them, they aim to impress with exaggerated bass, harsh treble, and overhyped mid-range.
Monitors, however, are intended to reveal an accurate picture of the audio coming through the speakers. This allows you to make critical adjustments, confident that what you’re hearing will translate to other playback systems.
What To Look For In A Monitor For Kemper Amps
Tweaking your Kemper Amp on low-quality studio monitors can have bad results. So, on your next gig, you might be surprised to find that the balance is all wrong. Treble might be harsh, and the bottoms off. This can make you rethink your setup.
- First of all, think about amplification. The audio interface’s electrical signals are calibrated to different levels than those required by a regular speaker. So to give the signal more juice, the monitor needs the help of an amplifier.
- The second, the speaker design. A classic two-way monitor features a woofer for producing low frequencies, and a tweeter, for high and high-mid frequencies. Audio signals are separated by a crossover filter that splits the input into low and high bands.
- Cheaper models tend to have the crossover point in the mid-range. That’s why higher-end models sport a three-way design, keeping the midrange frequencies free of crossover.
- It would help if you also considered the placement of the ports. A bass port is an exposed hole that vents the air out of the monitor, tuned to resonate in low, and extends the monitor’s low-frequency response. They can be placed in the front or the back. In general, you should avoid facing a port to the wall.
- Connectivity is also crucial. Active monitors are designed to be hooked up directly to your audio interface or computer. They include a level control, and room-compensating EQ controls are also standard. On the other hand, passive monitors require sending the output signal to an amplifier and then connecting that to the monitor.
Top 6 Monitors For Kemper Amps
Before anything else, decide what you need and choose a monitor that best suits your needs.
To help with your choice, here’s a list of the top 6 monitors for Kemper Amps:
JBL Professional 305P MkII
With a market crowded more than ever, especially in the sub-$450 price range, anything new from JBL targeting that range is worth your attention.
These are good-looking speakers with sleek lines of black plastic. Circles around the drivers are glossy black, while an impressive-looking point surrounds the tweeters.
The monitor offers the correct connection ports and controls at its back. The functionality of those is excellent without being complex. They are straightforward to use, with enough control to satisfy any audio geek.
Each monitor’s woofer and tweeter are powered by 41 watts of Class D amplification, with a 43Hz – 24kHz frequency response. If you’re looking for solid bass, you will likely have to add a subwoofer.
JBL’s 305P is a gorgeous monitor pair that offers exceptional performance on the budget. However, JBL offers the LSR-308P with 8-inch woofers if you’re looking for more power.
Pros Of The JBL
- These monitors are affordable
- Accurate upper register
- Wide center image
Cons Of The JBL
- The midrange is a little weak
Earthquake Sound MPower Series
The Earthquake Sound MPower Series price makes up for its incredible sound quality, making it one of the best nearfield monitors out there. Thanks to its superb sound, this tops most of the mediocre-sounding nearfields.
The Earthquake Sound MPower Series offers sound clarity, accurate reproduction, and harmonious balance and transparency.
Available in 6.5-inch and 8-inch models, these active monitors are equipped with full-featured amplifiers, woofers with stiff Aramid glass fiber cones, and ultra-fast ribbon tweeters. In addition, the MPower-6 and MPower-8 can easily match any room decor with their deep matte black finish and smooth edges.
It’s one of the best sounding monitors in its price range.
Pros Of The Earthquake Sound MPower Series
- Great performance
- It doesn’t degrade when placed on a shelf
- Built-in filters and level control
Cons Of The Earthquake Sound MPower Series
- Slightly understated sibilance
KRK Classic 5
The KRK Classic 5 is not your standard flat response monitor. Instead, it’s designed for producers and DJs looking for more bass from a small-format studio monitor.
The woven glass fiber composite used to build this model combines physical strength and stiffness with very good self-damping. In turn, it delivers a much tighter sound.
The reliable build pairs a 5″ woofer and a 1″ soft dome tweeter. They are very efficient, with just 15W driving the tweeter and 30W powering the mid-range/bass.
The cabinet is made out of high-density particleboard with rounded corners. The style is pretty simple yet attractive, with yellow speaker cones and logos.
KRK offers excellent value, delivering a realistic, well-balanced sound in a typical studio environment.
Pros Of The KRK Classic 5
- Good bass
- Attractive design
Cons Of The KRK Classic 5
From a distance, these look just like your regular budget speakers. Still, if you look closer, you can quickly notice that that’s not the case.
Neumann used high-quality aluminum to build the cabinets. The profile of the baffle and the waveguides results from a clinically precise design. Also, the cabs give off zero vibrations when in use, thanks to the meticulous mathematical calculation.
Speakers are powered by an analog class A/B amplification, meaning that each speaker gets 50W, resulting in 100 Watts per speaker. The rear panel reveals a couple of exciting features, of which the more prominent ones are the Bass, Mid-Low, and Treble separate slides.
The Neumann KH120A is a great speaker system. It performs to a far higher standard than its size might suggest. This is a very clean, neutral, and transparent system capable of working at silly volumes.
Pros Of The Neumann
- Surprisingly wide bandwidth
- Superb build quality
- Excellent resolution and a very detailed sound
Cons Of The Newmann
- None, for this price range
Avantone Pro MixCube
You must’ve seen a professional mixer use a small radio or a cheap desktop speaker. The reason behind it is that those “low-quality” speakers do the best job of highlighting their mixes’ midrange content.
You might even see them using something of better quality, like Yamaha NS-10M or Auratone. Whatever the setup, you’ll find the most common pairing to be a broader set of full-range monitors and a smaller set of midrange-focused ones.
Auratone 5C was a passive speaker with a single 5″ driver that found its way in significant studios. And Avantone Active MixCibe is an improved, refreshed version of that little yet impressive speaker.
The amp offers 60 watts RMS and a frequency response of 90Hz – 17Khz, enough to satisfy any audio geek.
Pros Of The Avontone
- The ideal second point of reference for Full-range speaker playback
- Quality construction
- Great value
Cons Of The Avontone
- Not adequate as a primary monitor
Pioneer PRO DJ DM-40
Pioneer is known for its domestic audio products and impressive DJ product range. Even though these are marketed as DJ monitors, they work just as well for other needs.
These wooden monitors are pretty small, sleek, and professional-looking. However, while reasonably compact, they are not small and not exceptionally light. The DM-40’s are reassuringly heavy for their size, meaning there’s a lot of stuff packed inside the cabinet.
The master speaker contains the amplifier, socket for the main leads to plug into, and rotary volume control. There’s nothing much on the back of the slave speaker except from two inputs.
The sound quality is pretty crisp, with nicely defined highs, rich mids, and punchy bass. In addition, the sound is full, with more than enough volume, giving the illusion of a high-end sound experience.
Pros Of The Pioneer Pro
- Quality construction
- Great sound reproduction
Cons Of The Pioneer Pro
- They are primarily desktop monitors
We hope you found a great monitor. Here are some of our other reviews.
Are you on the hunt for the best bicycle for commuting to work? Well, firstly, I applaud you for your decision. Riding a bike to work is a great thing to help the environment. It also allows you...
Shopping for office equipment can be challenging, whatever it is that you're looking for. The same goes for work-quality headphones. So good-quality headphones are usually on a top-priority list of...